Dam effects on bedload transport on the upper Santa Ana River,California, and implications for native fish habitat

Dams disrupt the flow of water and sediment and thus have the potential to affect the downstream geomorphic characteristics of a river. Though there are some well‐known and common geomorphic responses to dams, such as bed armouring, the response downstream from any particular dam is dependent on local conditions. Herein, we investigate the response of the upper Santa Ana River in southern California, USA, to the construction of a large dam at the transition from mountains to valley, using calculations of bedload transport capacity on the mainstem below the dam and for major tributaries. Approximate sediment budgets were constructed for downstream reaches to estimate deposition and erosion rates for sand, gravel, and cobble particle sizes. Our results indicate that the classical response of bed armouring and erosion is likely limited to a short reach immediately below the dam. Farther downstream, though transport capacity is reduced by flow regulation by the dam, the channel reaches are likely to remain depositional but with reduced deposition rates. Persistent deposition, as opposed to erosion, is the result of the replenishment of flow and sediment supply by large downstream tributaries. In addition, the calculations indicate that the composition of the bed is unlikely to change substantially in downstream reaches. A Monte Carlo approach was employed to estimate the uncertainty in the sediment budget predictions. The impacts of the dam on the geomorphic character of the river downstream could have implications for native fish that rely on coarse substrate that supports their food base.     

基于α-FeOOH催化H2O2蒸气的低温烟气脱硝实验

针铁矿是分布广泛、储量丰富的铁氧化物，其主要成分为α-羟基氧化铁（α-FeOOH）。为了探究针铁矿在催化H₂O₂烟气脱硝反应中的性能，本文通过沉淀-水解法制备了α-FeOOH，并在自行搭建的实验台上开展了α-FeOOH催化H₂O₂的低温烟气脱硝实验研究，深入分析了H₂O₂流量、H₂O₂浓度、汽化温度、反应温度和共存气体浓度等工况参数对脱硝性能的影响。采用离子色谱（IC）分析了单独脱硝反应和同时脱硫脱硝反应后的含氧酸成分，结合各项表征分析技术考察了催化剂反应前后的理化特性和稳定性。实验结果显示，随着汽化温度和反应温度的升高，NO的脱除效率先增加后降低；增加H₂O₂浓度对脱硝效率有明显的促进作用。当汽化温度为140℃、反应温度为160℃时，以2.5mL/h注入10mol/L的H₂O₂脱硝效率达到80%。当SO₂浓度为1000μL/L时，脱硝效率提高至86.4%。离子色谱分析结果显示，单独脱硝反应和同时脱硫脱硝反应后含氧酸产物为HNO₃和H₂SO₄。反应前后催化剂的表征结果显示，α-FeOOH在脱硝反应后依然具有良好的稳定性，显示出针铁矿在低温烟气脱硝工艺中的潜在应用前景。     

移动加热源法制备单层硒化镓晶体

为了解决硒化镓(GaSe)晶体制备困难、化学性能差的问题,对GaSe晶体传统的化学汽相沉积制备方法进行了改进,采用移动加热源法制备GaSe晶体。搭建了GaSe晶体的制备装置,通过单片机精确调控制备晶体的高温炉的加热温度、移动位置等参数,并采用光学显微镜和原子力显微镜对所制备的GaSe晶体进行辅助表征。研究表明,利用移动加热源法可以制备出表面光滑且尺寸较大的单层二维GaSe晶体。由于对机电设备实现了自动精密移动,可对单层二维GaSe晶体实现高质量大批量的制备,有利于GaSe晶体在光电子学和纳电子学中的广泛应用。     

有限元SN中子输运模拟的区域分解并行

确定论中子输运方法具有计算速度快、可获取物理量的精细场分布、可高效多物理耦合等优点，随着有限元方法在中子输运模拟中的应用，复杂几何结构、大尺度下的屏蔽问题和临界问题都能得到高保真建模和分析。离散纵标（S_N）法是求解中子输运方程的有效数值方法，基于OpenMP并行机制对各独立离散方向进行并行求解，可提高S_N输运模拟的计算速度，但并行规模较有限。对几何空间进行区域分解并采用MPI并行机制，可实现大规模并行扩展，进而实现对大型问题的高精度快速求解。本文采用并行自适应非结构网格应用框架JAUMIN进行区域分解和进程间通信，通过并行S_N扫描实现了自主有限元输运程序ENTER的高效并行，完成正确性检验后在天河Ⅱ号超级计算机上使用1 440个CPU核完成了1.43×10⁷网格单元、2.81×10⁹自由度规模问题的测试，计算时间约7.4 h。表明该程序具备了有效模拟大型复杂结构中子输运问题的能力，具有一定工程应用价值。     

高纯半绝缘SiC电阻率影响因素

采用物理气相传输(PVT)法进行高纯半绝缘SiC晶体生长,利用高温真空解吸附以及在系统中通入HCl和H2的方法,有效降低了系统中N、B和Al等杂质的背景浓度。使用二次离子质谱(SIMS)对晶体中杂质浓度测试,N、B和Al浓度分别小于1×1016、1×1015和2×1014 cm-3。对加工得到的晶片进行测试,全片的电阻率均在1×1010Ω·cm以上,微管密度小于0.02 cm-2,(004)衍射面的X射线摇摆曲线半高宽为34″。结果表明,该方法可以有效降低SiC晶体中N、B和Al等杂质浓度,提升SiC晶片的电阻率。使用该方法成功制备了4英寸(1英寸=2.54 cm)高纯半绝缘4H-SiC晶体。     

镜面杂质与水汽吸放对露点仪影响的实验研究

显微成像露点仪在研制和测试过程中发现镜面杂质和内腔材质吸放水汽等影响测量精度的问题。针对镜面杂质对显微成像露点仪测量的影响开展了镜面图像特征的实验研究，结果表明：镜面杂质点处露珠凝结具有优先性，且反复凝结消散后镜面出现杂质沉降现象。针对水汽吸放对显微成像露点仪的影响开展了水汽释放与吸附效应的实验研究，结果表明：当温度发生变化时，显微成像露点仪感应舱内壁氧化铝材质存在释放（或吸附）水汽现象，使得显微成像露点仪测量值偏大（或偏小）。研究结果为露点仪在功能设置及镜面与腔体材料选择方面提供了参考。     

轻组分绝对占优的蒸汽再压缩隔离壁蒸馏塔的最优拓扑结构

隔离壁蒸馏塔（DWC）的双塔多段拓扑结构导致蒸汽再压缩热泵（VRHP）的应用具有多种可能性，包括单VRHP、多VRHP、多级VRHP以及它们的相互组合等复杂结构，这显著加剧了蒸汽再压缩隔离壁蒸馏塔（DWC-VRHP）综合与设计的复杂性与烦琐性。为解决这一问题，针对轻组分绝对占优的三元宽沸点物系的分离问题推演了DWC-VRHP的最优拓扑结构，由此能够有效回避系统综合与设计过程中的结构搜索问题并显著降低模型化与搜索计算的工作强度。轻组分绝对占优与宽沸点物性导致了塔顶冷凝器与预分离蒸馏塔的提馏段是主要的热源与热阱，也决定了DWC-VRHP的最优拓扑结构，即一个二级VRHP与DWC的耦合系统。第一级VRHP用于进料预热，既充分利用温度提升跨度小的特点，又可以通过进料分流强化气液相间的物质传递。第二级VRHP用于加热预分离蒸馏塔的提馏段（或公共提馏段），能够最大限度地降低分离操作的非可逆性。采用苯/甲苯/邻二甲苯和正戊烷/正己烷/正庚烷两个物系的分离问题对所提出的DWC-VRHP的最优拓扑结构进行了分析与验证。通过与DWC以及DWC-VRHP其他潜在结构的系统性比较，显示了所提出系统结构在稳态性能方面的优越性。     

Synthesis of photoluminescent SiC-SiOx nanowires using coal tar pitch as carbon source

SiC-SiOx nanowires (NWs) with core-shell and chain-bead structures were synthesized via a catalyst-free chemical vapor deposition (CVD) route without Ar gas, using silicon and coal tar pitch powders as raw materials. The SiC-SiOx NWs with sharp tips formed by solid-vapor between Si (s) and CO (g) or C (s) and SiO (g), liquid-vapor between Si (l) and CO (g), and vapor-vapor between SiO (g) and CO (g) growth process along the [111] direction. The NWs were several millimeters in length, and the average diameters of the chains and beads were 40–90 nm and 325 nm, respectively. The obtained NWs had good blue-green photoluminescence property owing to the stacking faults and amorphous SiOx. This novel CVD route is simple, low cost and suitable for large-scale production.     

新型低GWP高温热泵工质HFO-1234ze(Z)的研究进展

高温热泵可以有效回收工业余热，达到节能减排和保护环境的目的。目前，有关高温热泵技术的研究热点在于寻找一种全球变暖潜能值(GWP)低、使用性能良好的工质，以替代现有CFC-114、HFC-245fa工质。对新型环境友好型工质HFO-1234ze(Z)进行了综述，其GWP＜1，临界温度高于423 K，是一种潜在的高温热泵替代工质。总结了近年来国内外学者对HFO-1234ze(Z)的合成技术、热力学性质、输运性质、传热性能等方面的研究，并分析了HFO-1234ze(Z)在高温热泵系统中应用的可行性，认为HFO-1234ze(Z)在高温热泵中具有较好的工作性能和发展前景。     

Refrigerant charge reduction in vapor compression refrigeration cycles via liquid-to-suction heat exchange

This short communication reports a study of the potential for refrigerant charge reduction in vapor compression refrigeration systems by means of a liquid-to-suction heat exchanger. The analysis was carried out on purely thermodynamic grounds for refrigerants of current interest, such as R134a, R22, R290, R600a and R717, assuming the cooling capacity as a constraint so that the evaporating pressure is free to vary. It was found that the minimum amount of refrigerant can be reduced depending on the thermophysical properties of the refrigerant, the working conditions, and the charge inventory.